| AFM检测模块中PSD信号处理电路设计 | |
| Alternative Title | PSD signal processing circuit design in AFM detection module |
刘小进 ; 石振刚; 田孝军; 王栋; 周磊
| |
| Department | 机器人学研究室 |
| Source Publication | 仪器仪表学报
 |
| ISSN | 0254-3087 |
| 2012 | |
| Volume | 33Issue:SPages:291-294 |
| Contribution Rank | 1 |
| Funding Organization | 国家自然科学基金资助项目 (51005230) |
| Keyword | Afm 位置敏感器件 高速差分放大器 差分输出 单端输出 |
| Abstract | 为提高AFM 对基底的扫描速度和成像分辨率，选用了一种新型的位置敏感器件，设计了一套基于高速差分放大器的PSD 信号采集模块，该模块具有体积小、结构合理、受地面噪声干扰小等优点。为便于分析，实验中，用数字源表提供单路电流，将PSD 信号采集模块的差分输出与单端输出结果进行比较，同时对实验数据做频谱分析与线性度分析，实验证明：基于高速差分放大器的差分输出电路满足AFM 对PSD 模块在带宽、噪声、线性度等设计方面的要求。 |
| Other Abstract | A novel position detector is chosen to improve the scanning speed and resolution of AFM to basement. An optical signal acquisition module based on high speed differential amplifier for PSD differential output signal is designed. Our Module has such advantages as smaller size, more reasonable structure and less ground power interference. The one-channel current is supplied by source meter, and the differential outputs of PSD and single-ended outputs are compared. Then spectrum analysis and linearity analysis of the results are carried on. Experiment results show that our design can meet the requirements of PSD detector module in AFM in terms of bandwidth, noise, linearity etc. |
| Language | 中文 |
| Document Type | 期刊论文 |
| Identifier | http://ir.sia.cn/handle/173321/10331 |
| Collection | 机器人学研究室 |
| Affiliation | 1.沈阳理工大学 2.中国科学院沈阳自动化研究所机器人学国家重点实验室 |
| Recommended Citation GB/T 7714 | 刘小进,石振刚,田孝军,等. AFM检测模块中PSD信号处理电路设计[J]. 仪器仪表学报,2012,33(S):291-294. |
| APA | 刘小进,石振刚,田孝军,王栋,&周磊.(2012).AFM检测模块中PSD信号处理电路设计.仪器仪表学报,33(S),291-294. |
| MLA | 刘小进,et al."AFM检测模块中PSD信号处理电路设计".仪器仪表学报 33.S(2012):291-294. |
| Files in This Item: | ||||||
| File Name/Size | DocType | Version | Access | License | ||
| AFM 检测模块中PSD信号处理电路设计（799KB） | 开放获取 | CC BY-NC-SA | View Application Full Text | |||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment