SIA OpenIR  > 装备制造技术研究室
复杂薄壁零件激光快速成形过程的热力耦合场数值模拟
其他题名Thermo-mechanical Coupling Field Simulation of Complex Thin-wall Part Laser Rapid Prototype Process
王福雨; 刘伟军; 赵宇辉; 孔源; 来佑彬
作者部门装备制造技术研究室
关键词热力耦合场 激光直接成形 钛合金 数值模拟
发表期刊机械工程学报
ISSN0577-6686
2013
卷号49期号:5页码:191-198
收录类别EI ; CSCD
EI收录号20131616214619
CSCD记录号CSCD:4785194
产权排序1
摘要研究直接激光成形过程中叶片温度场与热应力场的关系,改善成形质量。以空心叶片为例,根据激光测量仪测得的散点图,用圆弧逼近得到叶片的近似轮廓。利用有限元软件MSC.Marc建立Ti-6Al-4V(TC4)圆弧逼近的空心叶片的有限元模型,并对激光直接成形过程进行数值模拟,得到叶片在成形过程以及冷却过程中的温度场和热应力场。随着成形的进行,由于热量的积累,成形叶片的温度不断升高,已成形部位的热应力随着成形过程的热循环不断变化,小曲率半径处的热应力大,且热循环对热应力变化影响较小;在直接激光成形结束后,整体温度开始下降,各处的热应力都逐渐升高。通过分析温度场和热应力场的分布情况,得到不同曲率半径对温度场...
其他摘要The research is focused on the relationship between the thermal field and thermal stress field during the process of the blade direct laser forming, so as to improve the forming quality. A hollow blade has been taken as example. According to the blade scatter-plot measured by the laser measurement instrument, the blade outline is approximated by a series of arc splines. Using finite element software MSC.Marc, a finite element model of arc approximation of the Ti-6Al-4V (TC4) hollow blade is established, and the hollow blade of laser direct forming is simulated to acquire the thermal field and thermal stress field in the forming and cooling process. During the forming process, the temperature of the forming hollow blade is increased and thermal stress of the already formed parts constantly changes with the thermal cycle due to the heat accumulation. And the part with a smaller curvature radius has a greater thermal stress which is affected by thermal cycle slightly. After the forming process, the reduction of the whole temperature leads to the thermal stress of every part rising gradually. Moreover, analyzing the distribution of the thermal field and thermal stress field, the correlation between the curvature radius and thermal field and thermal stress field can be obtained. The forming method of improving the quality is put forward based on the simulation result, summarized correlation, and experience. Finally, the real part just like the simulation model is worked out by utilizing the laser direct forming technology to verify the correctness of the simulation and summarized relationship.
语种中文
引用统计
被引频次:5[CSCD]   [CSCD记录]
文献类型期刊论文
条目标识符http://ir.sia.cn/handle/173321/10559
专题装备制造技术研究室
作者单位1.中国科学院沈阳自动化研究所
2.中国科学院大学
推荐引用方式
GB/T 7714
王福雨,刘伟军,赵宇辉,等. 复杂薄壁零件激光快速成形过程的热力耦合场数值模拟[J]. 机械工程学报,2013,49(5):191-198.
APA 王福雨,刘伟军,赵宇辉,孔源,&来佑彬.(2013).复杂薄壁零件激光快速成形过程的热力耦合场数值模拟.机械工程学报,49(5),191-198.
MLA 王福雨,et al."复杂薄壁零件激光快速成形过程的热力耦合场数值模拟".机械工程学报 49.5(2013):191-198.
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
复杂薄壁零件激光快速成形过程的热力耦合场(1439KB) 开放获取CC BY-NC-SA浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[王福雨]的文章
[刘伟军]的文章
[赵宇辉]的文章
百度学术
百度学术中相似的文章
[王福雨]的文章
[刘伟军]的文章
[赵宇辉]的文章
必应学术
必应学术中相似的文章
[王福雨]的文章
[刘伟军]的文章
[赵宇辉]的文章
相关权益政策
暂无数据
收藏/分享
文件名: 复杂薄壁零件激光快速成形过程的热力耦合场数值模拟.pdf
格式: Adobe PDF
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。