| 激光快速成形 TA15 残余应力影响因素的研究 | |
| Alternative Title | Influencing Factors of Residual Stress of Ti-6.5Al-1Mo-1V-2Zr Alloy by Laser Rapid Forming Process |
来佑彬 ; 刘伟军; 孔源; 王福雨; 赵宇辉
| |
| Department | 装备制造技术研究室 |
| Source Publication | 稀有金属材料与工程
 |
| ISSN | 1002-185X |
| 2013 | |
| Volume | 42Issue:7Pages:1526-1530 |
| Indexed By | SCI ; EI ; CSCD |
| EI Accession number | 20133516679372 |
| WOS ID | WOS:000323016700043 |
| CSCD ID | CSCD:4917181 |
| Contribution Rank | 1 |
| Keyword | 激光快速成形 小孔法 残余应力 |
| Abstract | 采用小孔法对激光快速成形TA15钛合金样件进行残余应力影响因素的研究。结果表明:激光功率、扫描速度、送粉速度、扫描方式等工艺参数对残余应力均有显著影响。激光功率越大,残余应力越大;随着扫描速度的增大,残余应力则不断减小;随着送粉速度的增大,残余应力有增加的趋势;3种扫描方式中的交错扫描是残余应力最小的成形扫描方式。最后,对成形样件不同位置的残余应力进行了测定分析,得出成形件中间位置是残余应力峰值点的结论。 |
| Other Abstract | The influencing factors of residual stress of Ti-6.5Al-1Mo-1V-2Zr alloys by laser rapid forming progress were investigated by the hole-drilling method. The results show that laser power, laser scanning speed, powder feed rate and the scanning method significantly affect the residual stress. The greater the laser power, the greater the residual stress. With the increase of scanning speed, residual stress is constantly decreased. With the increase of powder feed rate, there is an increasing trend of residual stress. Among the three scanning methods, the staggered scanning method is preference. Finally, the residual stress at different positions of the forming sample was analyzed, and it is concluded that the middle position is the residual stress peak. |
| Language | 中文 |
| WOS Headings | Science & Technology ; Technology |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.sia.cn/handle/173321/12449 |
| Collection | 智能产线与系统研究室 |
| Corresponding Author | 来佑彬 |
| Affiliation | 1.中国科学院沈阳自动化研究所 2.中国科学院大学 |
| Recommended Citation GB/T 7714 | 来佑彬,刘伟军,孔源,等. 激光快速成形 TA15 残余应力影响因素的研究[J]. 稀有金属材料与工程,2013,42(7):1526-1530. |
| APA | 来佑彬,刘伟军,孔源,王福雨,&赵宇辉.(2013).激光快速成形 TA15 残余应力影响因素的研究.稀有金属材料与工程,42(7),1526-1530. |
| MLA | 来佑彬,et al."激光快速成形 TA15 残余应力影响因素的研究".稀有金属材料与工程 42.7(2013):1526-1530. |
| Files in This Item: | ||||||
| File Name/Size | DocType | Version | Access | License | ||
| 激光快速成形TA15残余应力影响因素的研（666KB） | 期刊论文 | 出版稿 | 开放获取 | ODC PDDL | View Application Full Text | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment