SIA OpenIR  > 装备制造技术研究室
Three-dimensional stability prediction and chatter analysis in milling of thin-walled plate
Qu S(曲胜); Zhao JB(赵吉宾); Wang TR(王天然)
作者部门装备制造技术研究室
关键词Three-dimensional Stability Lobe Chatter Feed Per Tooth Thin-walled Plate
发表期刊International Journal of Advanced Manufacturing Technology
ISSN0268-3768
2016
卷号86期号:5页码:2291-2300
收录类别SCI ; EI
EI收录号20160401852438
WOS记录号WOS:000383084300094
产权排序1
资助机构National Basic Research Program of China (Grant No.2011CB302400) and the National Natural Science Foundation of China (Grant No.51175495).
摘要Stability lobe diagram can be used for selecting proper milling parameters to perform chatter-free operations and improve productivity during milling of thin-walled plates. This paper studies the machining stability in milling of thin-walled plates and develops a three-dimensional stability lobe diagram of the spindle speed, tool position, and axial depth of cut. The workpiece-holder system is modeled as a 2-degree-of-freedom system considering that the tool system is much more rigid than the thin-walled plate, and dynamic equations of motion described for the workpiece-holder system are solved numerically in time domain to compute the dynamic displacements of the thin-walled plate. Statistical variances of the dynamic displacements are then employed as a chatter detection criterion to acquire the stability lobe diagram. The experimentally obtained stability limits correspond well with the predicted stability limits. In addition, influence of feed rate on stability limits is also investigated. By performing frequency analysis of the measured cutting forces to judge if chatter occurs, it is found that feed per tooth has little influence on the stability limits. However, feed per tooth impacts the machined surface quality. The results show that the surface quality drops by increasing feed per tooth.
语种英语
WOS标题词Science & Technology ; Technology
WOS类目Automation & Control Systems ; Engineering, Manufacturing
关键词[WOS]IDENTIFICATION ; DESIGN
WOS研究方向Automation & Control Systems ; Engineering
引用统计
文献类型期刊论文
条目标识符http://ir.sia.cn/handle/173321/17645
专题装备制造技术研究室
通讯作者Qu S(曲胜)
作者单位1.Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
2.University of Chinese Academy of Sciences, Beijing, China
推荐引用方式
GB/T 7714
Qu S,Zhao JB,Wang TR. Three-dimensional stability prediction and chatter analysis in milling of thin-walled plate[J]. International Journal of Advanced Manufacturing Technology,2016,86(5):2291-2300.
APA Qu S,Zhao JB,&Wang TR.(2016).Three-dimensional stability prediction and chatter analysis in milling of thin-walled plate.International Journal of Advanced Manufacturing Technology,86(5),2291-2300.
MLA Qu S,et al."Three-dimensional stability prediction and chatter analysis in milling of thin-walled plate".International Journal of Advanced Manufacturing Technology 86.5(2016):2291-2300.
条目包含的文件 下载所有文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
Three-dimensional st(3744KB)期刊论文出版稿开放获取ODC PDDL浏览 下载
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Qu S(曲胜)]的文章
[Zhao JB(赵吉宾)]的文章
[Wang TR(王天然)]的文章
百度学术
百度学术中相似的文章
[Qu S(曲胜)]的文章
[Zhao JB(赵吉宾)]的文章
[Wang TR(王天然)]的文章
必应学术
必应学术中相似的文章
[Qu S(曲胜)]的文章
[Zhao JB(赵吉宾)]的文章
[Wang TR(王天然)]的文章
相关权益政策
暂无数据
收藏/分享
文件名: Three-dimensional stability prediction and chatter analysis in milling of thin-walled plate.pdf
格式: Adobe PDF
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。