SIA OpenIR  > 智能产线与系统研究室
TC17钛合金激光冲击强化实验研究
Alternative TitleExperimental Study on Laser Shock Peening of TC17 Titanium Alloy
张恭轩; 吴嘉俊; 高宇; 桓恒; 胡太友; 乔红超; 陆莹
Department装备制造技术研究室
Source Publication表面技术
ISSN1001-3660
2018
Volume47Issue:3Pages:96-100
Indexed ByEI ; CSCD
EI Accession number20183205669300
CSCD IDCSCD:6211085
Contribution Rank2
Keyword激光冲击强化 疲劳 应力 表面粗糙度 钛合金
Abstract

目的 探索更为高效的激光冲击强化方式,提高TC17钛合金板片的疲劳寿命。方法 先采用设备4个光路对TC17钛合金板片进行强化,强化试验结束后,应用LXRD-X射线应力分析仪测定其表面残余应力,再对板片进行表面粗糙度测试。选取新的板片进行应力分布测试,确定TC17钛合金板片在一阶弯曲振型下的应力水平,然后在该应力水平下对经冲击强化和未经冲击强化的板片进行疲劳对比试验。结果 板片表面产生了残余压应力层,在相同激光能量下,椭圆形光斑强化区域的残余应力大约是方形光斑强化区域的1.33倍,且椭圆形区域各点残余应力数值相差更小。强化区域的表面粗糙度为0.25~0.34 mm,未强化区域的表面粗糙度为0.13~0.16 mm。疲劳试验时,未经激光冲击强化的板片均在6~11 min内发生断裂,而经激光强化后的4块板片中,1块未断裂,另外3块分别在59、381、709 min断裂。结论 激光冲击强化对材料性能起到了强化作用,且椭圆形光斑的强化优于方形光斑。强化后,板片的表面粗糙度增加了1倍,疲劳寿命提高了52倍。

Other Abstract

The work aims to explore a more efficient laser shock peening method, and improve fatigue life of TC17 titanium alloy sheet bars. Firstly, TC17 titanium alloy sheet bars were peened with four optical paths, then surface residual stress of the sheet bars was measured with LXRD-X-ray stress analyzer, and finally surface roughness test was performed to the sheet bars. New sheet bars were selected to perform stress distribution test and determine stress level of the TC17 titanium alloy sheet bars in first-order bending mode. Then, fatigue comparison test was performed to original sheet bars and shock peened ones at the stress level. A residual compressive stress layer took shape on the surface of the sheet bars. Provided with the same laser energy, residual stress of elliptic spot peened area wasabout 1.33 times that of rectangular spot peened area. Residual stress value in each point in the elliptic area differed slightly from each other. Surface roughness of peened area was 0.25~0.34 mm, and for unpeened area, 0.13~0.16 mm. In the fatigue test, the sheet bars not receiving laser impact peening fractured in 6~11 minutes. Among 4 sheet bars receiving laser impact peening, one did not fracture, and the other three fractured in 59, 381 and 709 min, respectively. Laser shock peening can enhance properties of materials, peening ofelliptic spot is superior tothat of square spot. Surface roughness of sheet bars increases by 1 times and fatigue life by 53 times after laser shock peening.

Language中文
Citation statistics
Cited Times:1[CSCD]   [CSCD Record]
Document Type期刊论文
Identifierhttp://ir.sia.cn/handle/173321/21726
Collection智能产线与系统研究室
Corresponding Author张恭轩
Affiliation1.中国航发沈阳黎明航空发动机有限责任公司
2.中国科学院沈阳自动化研究所
3.中国科学院大学
Recommended Citation
GB/T 7714
张恭轩,吴嘉俊,高宇,等. TC17钛合金激光冲击强化实验研究[J]. 表面技术,2018,47(3):96-100.
APA 张恭轩.,吴嘉俊.,高宇.,桓恒.,胡太友.,...&陆莹.(2018).TC17钛合金激光冲击强化实验研究.表面技术,47(3),96-100.
MLA 张恭轩,et al."TC17钛合金激光冲击强化实验研究".表面技术 47.3(2018):96-100.
Files in This Item: Download All
File Name/Size DocType Version Access License
TC17钛合金激光冲击强化实验研究.pd(1280KB)期刊论文作者接受稿开放获取ODC PDDLView Download
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[张恭轩]'s Articles
[吴嘉俊]'s Articles
[高宇]'s Articles
Baidu academic
Similar articles in Baidu academic
[张恭轩]'s Articles
[吴嘉俊]'s Articles
[高宇]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[张恭轩]'s Articles
[吴嘉俊]'s Articles
[高宇]'s Articles
Terms of Use
No data!
Social Bookmark/Share
File name: TC17钛合金激光冲击强化实验研究.pdf
Format: Adobe PDF
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.