Knowledge Management System of Shenyang Institute of Automation, CAS
| Research on the influence of traditional laser shock process machining path | |
Yang H(杨灏)1,2 ; Zhao JB(赵吉宾)1; Sun BY(孙博宇)1; Wang TR(王天然)1
| |
| Department | 工艺装备与智能机器人研究室 |
| Source Publication | Optik
 |
| ISSN | 0030-4026 |
| 2020 | |
| Volume | 203Pages:1-5 |
| Indexed By | SCI ; EI |
| EI Accession number | 20195007822526 |
| WOS ID | WOS:000545594000013 |
| Contribution Rank | 1 |
| Funding Organization | National Natural Science Foundation of China(NSFC) (No. U1608259) ; National Key Technology R&D Program of China (2015BAF08B01) |
| Keyword | Laser shock process Traditional machining path Stress distribute Overlap rate |
| Abstract | In most laser shock process experiments, the traditional typical laser path is usually in use. The traditional typical laser path is easy to control the laser beam and the multi-axis machining platform, effective to improve the material surface properties. The traditional laser path moves from the start point and goes through straight line and turn back in the next row then continue to full fill the machining area. However, the surface stress distribute is unbalance. The material surface would be destroyed when the outside stress larger than limit of any axis. To make the stress distribution more reasonable, the manuscript discuss the reasons caused the phenomenon. © 2019 Elsevier GmbH |
| Language | 英语 |
| WOS Subject | Optics |
| WOS Keyword | SURFACE |
| WOS Research Area | Optics |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.sia.cn/handle/173321/26037 |
| Collection | 工艺装备与智能机器人研究室 |
| Corresponding Author | Yang H(杨灏) |
| Affiliation | 1.Shenyang Institute of Automation Chinese Academy of Sciences, Shenyang 110000, China 2.University of Chinese Academy of ScieNces, Beijing 100049, China |
| Recommended Citation GB/T 7714 | Yang H,Zhao JB,Sun BY,et al. Research on the influence of traditional laser shock process machining path[J]. Optik,2020,203:1-5. |
| APA | Yang H,Zhao JB,Sun BY,&Wang TR.(2020).Research on the influence of traditional laser shock process machining path.Optik,203,1-5. |
| MLA | Yang H,et al."Research on the influence of traditional laser shock process machining path".Optik 203(2020):1-5. |
| Files in This Item: | ||||||
| File Name/Size | DocType | Version | Access | License | ||
| Research on the infl（655KB） | 期刊论文 | 出版稿 | 开放获取 | CC BY-NC-SA | View Application Full Text | |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment